>The main technical indicators
◆nonlinearity:0.01%F·S
◆The input sensitivity:0.3μv/d
◆The input signal range:- 5mV~40mV
◆A/DConversion speed:100 Times/SEC.
◆A/DConversion code number:1 million yards
◆Display points degree: 60000 yards or less
◆Zero temperature:≤0.2μV/℃
◆Full temperature effect:10ppm/℃
◆Sensor excitation power supply:voltage DC12±0.3V current 250mA(Can be customized 200mA)
◆Analog output: all the way (or 2) independent programmable standard load resistance current, voltage signal when4~20mA≤600Ω,when0~10mA≤1.5KΩ1~5V when0~5V≥10KΩ,when0~10V≥20KΩ The accuracy of 0.15%F·S
◆Serial communication interface:RS- 232C、RS- 485、RS- 422、20mA Current loop optional
◆Three road relay output interface: output normally open contacts(250V 5A)
◆Monitor: five red 0.8 and six green 0.4 inch LED digital tube
◆Power consumption:≤10VA
◆Using the environment:The power supply AC220 V、50±1Hz The temperature- 10~50℃ humidity 40℃(20- 90)%RH
◆Installation, appearance, opening (shape: width X height X deep hole or thick: wide X high unit: mm)
>Scope of application
Batching scale, scale, hopper scale and other industrial electronic scales
>The main function
◆Weighing measuring channel automatic and manual calibration function
◆Analog output channel automatic calibration and transmitting range arbitrarily.Set up and transfer function
◆Password address mode set the work parameters and control parameters.The number and into all kinds of calibration
◆Programmable digital filter function
◆Automatic zero and automatic batching compensation function
◆Drift tracking function
◆Programmable weighing control function
>The performance characteristics of
◆Signal input and analog output all the digital automatic calibration, transmitting range can be set freely
◆Wide range of input signal, suitable for all domestic or imported resistance strain type weighing and force transducer
◆All calibration, set the implementation operation on the front panel, and friendly interface, convenient to operate
◆Using single chip microcomputer integrated, highly integrated, less solder joints, high reliability
◆Automatic zero and automatic batching compensation function, make the batching accuracy is higher
◆Anti-interference ability, especially suitable for the industrial field